CO₂ laser

The carbon dioxide laser (CO₂ laser) was one of the earliest gas lasers to be developed (invented by Kumar Patel of Bell Labs in 1964), and is still one of the most useful. Carbon dioxide lasers are the highest-power continuous wave lasers that are currently available. They are also quite efficient: the ratio of output power to pump power can be as large as 20%. The CO₂ laser produces a beam of infrared light with the principal wavelength bands centering around 9.4 and 10.6 micrometers.

Because CO₂ lasers operate in the infrared, special materials are necessary for their construction. Typically, the mirrors are silvered, while windows and lenses are made of either germanium or zinc selenide. For high power applications, gold mirrors and zinc selenide windows and lenses are preferred. There are also diamond windows and lenses in use. Diamond windows are extremely expensive, but their high thermal conductivity and hardness make them useful in high-power applications and in dirty environments. Optical elements made of diamond can even be sand blasted without losing their optical properties. Historically, lenses and windows were made out of salt (either sodium chloride or potassium chloride). While the material was inexpensive, the lenses and windows degraded slowly with exposure to atmospheric moisture.

The most basic form of a CO₂ laser consists of a gas discharge (with a mix close to that specified above) with a totalreflector at one end, and an output coupler (a partially reflecting mirror) at the output end.

The CO₂ laser can be constructed to have CW powers between milliwatts (mW) and hundreds of kilowatts (kW). It is also very easy to actively Q-switch a CO₂ laser by means of a rotating mirror or an electro-optic switch, giving rise to Q-switched peak powers of up to gigawatts (GW).

Because the laser transitions are actually on vibration-rotation bands of a linear triatomic molecule, the rotational structure of the P and R bands can be selected by a tuning element in the laser cavity. Prisms are not practical as tuning elements because most media that transmit in the mid-infrared absorb or scatter some of the light, so the frequency tuning element is almost always a diffraction grating. By rotating the diffraction grating, a particular rotational line of the vibrational transition can be selected. The finest frequency selection may also be obtained through the use of an etalon. In practice, together withisotopic substitution, this means that a continuous comb of frequencies separated by around 1 cm⁻¹ (30 GHz) can be used that extend from 880 to 1090 cm⁻¹. Such “line-tuneable” carbon dioxide lasers are principally of interest in research applications.

Applications

Because of the high power levels available (combined with reasonable cost for the laser), CO₂ lasers are frequently used in industrial applications for cutting andwelding, while lower power level lasers are used for engraving. They are also very useful in surgical procedures because water (which makes up most biological tissue) absorbs this frequency of light very well. Some examples of medical uses are laser surgery and skin resurfacing (“laser facelifts”, which essentially consist of vaporizing the skin to promote collagen formation). Also, it could be used to treat certain skin conditions such as hirsuties papillaris genitalis by removing embarrassing or annoying bumps, podules, etc. Researchers in Israel are experimenting with using CO₂ lasers to weld human tissue, as an alternative to traditional sutures.

The common plastic poly (methyl methacrylate) (PMMA) absorbs IR light in the 2.8–25 µm wavelength band, so CO₂ lasers have been used in recent years for fabricating microfluidic devices from it, with channel widths of a few hundred micrometers.

Because the atmosphere is quite transparent to infrared light, CO₂ lasers are also used for military rangefinding using LIDAR techniques.

CO₂ lasers are used in the Silex process to enrich uranium.

The Soviet Polyus was designed to use a megawatt carbon-dioxide laser as an orbit to orbit weapon to destroy SDI satellites.

www.techglads.com